Schneider Electric Altivar 320
Altivar 320
Schneider Electric Altivar 320 (altro) ha una mappa Modbus di 1071 registri. Function code usati: 3 (holding register). Tipi di dato: int16, uint16. Esempi: Drive nominal rating (NCV) all'indirizzo 3011 (FC 3, uint16); Drive mains voltage (VCAL) all'indirizzo 3012 (FC 3, uint16); Std. motor frequency (BFR) all'indirizzo 3015 (FC 3, uint16); Drive nominal current (INV) all'indirizzo 3017 (FC 3, uint16, A).
AltroDa documento
Mappa registri Modbus
10 registri
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- A
- Scala
- 0.1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- kHz
- Scala
- 0.1
- Len
- 1
- Accesso
- R/W
- FC
- 3
- Tipo
- uint16
- Unità
- Hz
- Scala
- 0.1
- Len
- 1
- Accesso
- R/W
| Len | Scala | Endian | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 3011 | Drive nominal rating (NCV) Factory setting [Unknown rating] NO | drive_nominal_rating_ncv | 3 | uint16 | 1 | 1 | — | R | big | |
| 3012 | Drive mains voltage (VCAL) Factory setting [Unknown drive rate volt.] NO | drive_mains_voltage_vcal | 3 | uint16 | 1 | 1 | — | R | big | |
| 3015 | Std. motor frequency (BFR) Writable only when the motor is stopped; Factory setting [50Hz Motor frequency] 50Hz | std_motor_frequency_bfr | 3 | uint16 | 1 | 1 | — | R/W | big | |
| 3017 | Drive nominal current (INV) Range 0.0 A ... 6553.5 A; Factory setting Refer to programming manual | drive_nominal_current_inv | 3 | uint16 | 1 | 0.1 | A | R | big | |
| 3022 | Factory setting group (FRY) Writable only when the motor is stopped; Factory setting BIT1 | factory_setting_group_fry | 3 | uint16 | 1 | 1 | — | R/W | big | |
| 3052 | Macro config selection (CFG) Writable only when the motor is stopped; Factory setting [Standard Start/Stop] STS | macro_config_selection_cfg | 3 | uint16 | 1 | 1 | — | R/W | big | |
| 3053 | Customized macro (CCFG) | customized_macro_ccfg | 3 | uint16 | 1 | 1 | — | R | big | |
| 3101 | Switch. freq type (SFT) Writable only when the motor is stopped; Factory setting [Switch.frequency type 1] HF1 | switch_freq_type_sft | 3 | uint16 | 1 | 1 | — | R/W | big | |
| 3102 | Drive switching freq. (SFR) Range 2.0 kHz ... 16.0 kHz; Factory setting 4.0 kHz | drive_switching_freq_sfr | 3 | uint16 | 1 | 0.1 | kHz | R/W | big | |
| 3103 | Max. output frequency (TFR) Writable only when the motor is stopped; Range 10.0 Hz ... 599.0 Hz; Factory setting Refer to programming manual | max_output_frequency_tfr | 3 | uint16 | 1 | 0.1 | Hz | R/W | big |
Stai vedendo 10 registri su 1071.
La mappa completa è riservata agli utenti registrati. La registrazione è gratuita.