Regin Corrigo ventilation
Corrigo ventilation
Regin Corrigo ventilation (plc, controllori e i/o) ha una mappa Modbus di 1102 registri, riferita al firmware 3.6+. Function code usati: 1 (coil), 2 (discrete input), 3 (holding register), 4 (input register). Tipi di dato: boolean, int16, uint16. Esempi: Enable fast stop if overheat alarm all'indirizzo 1 (FC 1, boolean); Outdoor temperature (read-only) all'indirizzo 1 (FC 4, int16); Setpoint supply air temperature when constant supply air temperature function all'indirizzo 1 (FC 3, int16); Set if timechannel full speed is active all'indirizzo 1 (FC 2, boolean).
PLC, controllori e I/ODa documento
Mappa registri Modbus
10 registri
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 4
- Tipo
- int16
- Unità
- —
- Scala
- 0.1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- int16
- Unità
- —
- Scala
- 0.1
- Len
- 1
- Accesso
- R/W
- FC
- 2
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 4
- Tipo
- int16
- Unità
- —
- Scala
- 0.1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- int16
- Unità
- —
- Scala
- 0.1
- Len
- 1
- Accesso
- R/W
- FC
- 2
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
- FC
- 1
- Tipo
- boolean
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R/W
| Len | Scala | Endian | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Enable fast stop if overheat alarm Signal VentSettings.Cor_OverHeatFastStop. Default 0. | enable_fast_stop_if_overheat_alarm | 1 | boolean | 1 | 1 | — | R/W | big | |
| 1 | Outdoor temperature (read-only) Signal VentActual.Cor_Outdoor temp(0). | outdoor_temperature_read_only | 4 | int16 | 1 | 0.1 | — | R | big | |
| 1 | Setpoint supply air temperature when constant supply air temperature function Signal VentSettings.Cor_SupplySetpoint. Default 18°C. | setpoint_supply_air_temperature_when_constant_supply_air_temperature_function | 3 | int16 | 1 | 0.1 | — | R/W | big | |
| 1 | Set if timechannel full speed is active Signal TimePro.TimeGroupFanFullSpeed. | set_if_timechannel_full_speed_is_active | 2 | boolean | 1 | 1 | — | R | big | |
| 2 | Blocks cooling step signals if set and alarm "Malfunction P1 cooler" is triggered Signal VentSettings.Cor_CoolStepAlarmBlock. Default 0. | blocks_cooling_step_signals_if_set_and_alarm_malfunction_p1_cooler_is_triggered | 1 | boolean | 1 | 1 | — | R/W | big | |
| 2 | Efficiency in % for exchanger Signal VentActual.Cor_Efficiency. | efficiency_in_for_exchanger | 4 | int16 | 1 | 0.1 | — | R | big | |
| 2 | Outdoor temp for first curve point for outdoor compensated setpoint Signal VentSettings.Cor_Curve1_X1. Default -20°C. | outdoor_temp_for_first_curve_point_for_outdoor_compensated_setpoint | 3 | int16 | 1 | 0.1 | — | R/W | big | |
| 2 | Set if timechannel reduced speed is active Signal TimePro.TimeGroupFanHalfSpeed. | set_if_timechannel_reduced_speed_is_active | 2 | boolean | 1 | 1 | — | R | big | |
| 3 | Command to acknowledge all alarms Signal VentSettings.Cor_AlaAcknowAll. Default 0. | command_to_acknowledge_all_alarms | 1 | boolean | 1 | 1 | — | R/W | big | |
| 3 | Command to acknowledge all alarms (VentSettings.Cor_AlaAcknowAll) Signal VentSettings.Cor_AlaAcknowAll. Default 0. | command_to_acknowledge_all_alarms_ventsettings_cor_alaacknowall | 1 | boolean | 1 | 1 | — | R/W | big |
Stai vedendo 10 registri su 1102.
La mappa completa è riservata agli utenti registrati. La registrazione è gratuita.