Metaltex IF20
IF20
Metaltex IF20 (inverter) ha una mappa Modbus di 91 registri. Function code usati: 3 (holding register). Tipi di dato: boolean, int16, uint16. Esempi: Frequency command all'indirizzo 4096 (FC 3, int16, %); Running frequency all'indirizzo 4097 (FC 3, uint16); DC bus voltage all'indirizzo 4098 (FC 3, uint16); Output voltage all'indirizzo 4099 (FC 3, uint16).
InverterDa documento
Mappa registri Modbus
10 registri
- FC
- 3
- Tipo
- int16
- Unità
- %
- Scala
- 0.01
- Len
- 1
- Accesso
- W
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
- FC
- 3
- Tipo
- uint16
- Unità
- —
- Scala
- 1
- Len
- 1
- Accesso
- R
| Len | Scala | Endian | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 4096 | Frequency command Percentage of the maximum frequency (P0.12): -10000 to 10000 is -100.00 % to 100.00 %. | frequency_command | 3 | int16 | 1 | 0.01 | % | W | big | |
| 4097 | Running frequency The manual does not give the scaling; the D0 monitor parameters (0x7000 on) hold the same values with their units. | running_frequency | 3 | uint16 | 1 | 1 | — | R | big | |
| 4098 | DC bus voltage The manual does not give the scaling; the D0 monitor parameters (0x7000 on) hold the same values with their units. | dc_bus_voltage | 3 | uint16 | 1 | 1 | — | R | big | |
| 4099 | Output voltage The manual does not give the scaling; the D0 monitor parameters (0x7000 on) hold the same values with their units. | output_voltage | 3 | uint16 | 1 | 1 | — | R | big | |
| 4100 | Output current The manual does not give the scaling; the D0 monitor parameters (0x7000 on) hold the same values with their units. | output_current | 3 | uint16 | 1 | 1 | — | R | big | |
| 4101 | Output power The manual does not give the scaling; the D0 monitor parameters (0x7000 on) hold the same values with their units. | output_power | 3 | uint16 | 1 | 1 | — | R | big | |
| 4102 | Output torque The manual does not give the scaling; the D0 monitor parameters (0x7000 on) hold the same values with their units. | output_torque | 3 | uint16 | 1 | 1 | — | R | big | |
| 4103 | Running speed The manual does not give the scaling; the D0 monitor parameters (0x7000 on) hold the same values with their units. | running_speed | 3 | uint16 | 1 | 1 | — | R | big | |
| 4104 | S input status The manual does not give the scaling; the D0 monitor parameters (0x7000 on) hold the same values with their units. | s_input_status | 3 | uint16 | 1 | 1 | — | R | big | |
| 4105 | M01 output status The manual does not give the scaling; the D0 monitor parameters (0x7000 on) hold the same values with their units. | m01_output_status | 3 | uint16 | 1 | 1 | — | R | big |
Stai vedendo 10 registri su 91.
La mappa completa è riservata agli utenti registrati. La registrazione è gratuita.